Tyler Hand | Forum Posts

Forum Posts

Tyler Hand

Feb 20, 2021

In Basic Assembly and Setup

Hi, I am new to Arduino and just started on my Bittle project. Unfortunately, this error message keeps on popping up every time I try to upload a sketch for testing or calibration. Any help would be nice. Thanks! Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Arduino Uno" In file included from C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino:31:0: sketch\OpenCat.h: In member function 'void Motion::loadDataFromI2cEeprom(unsigned int&)': sketch\OpenCat.h:538:51: warning: ISO C++ says that these are ambiguous, even though the worst conversion for the first is better than the worst conversion for the second: Wire.requestFrom(DEVICE_ADDRESS, skillHeader); ^ In file included from sketch\OpenCat.h:85:0, from C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino:31: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr\libraries\Wire\src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int) uint8_t requestFrom(int, int); ^~~~~~~~~~~ C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr\libraries\Wire\src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t) uint8_t requestFrom(uint8_t, uint8_t); ^~~~~~~~~~~ In file included from C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino:31:0: sketch\OpenCat.h: At global scope: sketch\OpenCat.h:732:1: warning: narrowing conversion of '-9.0e+1' from 'double' to 'int8_t {aka signed char}' inside { } [-Wnarrowing] }; ^ sketch\OpenCat.h:732:1: warning: narrowing conversion of '2.25e+1' from 'double' to 'int8_t {aka signed char}' inside { } [-Wnarrowing] sketch\OpenCat.h:732:1: warning: narrowing conversion of '-9.0e+1' from 'double' to 'int8_t {aka signed char}' inside { } [-Wnarrowing] sketch\OpenCat.h:732:1: warning: narrowing conversion of '2.25e+1' from 'double' to 'int8_t {aka signed char}' inside { } [-Wnarrowing] sketch\OpenCat.h:732:1: warning: narrowing conversion of '-9.0e+1' from 'double' to 'int8_t {aka signed char}' inside { } [-Wnarrowing] sketch\OpenCat.h:732:1: warning: narrowing conversion of '-2.25e+1' from 'double' to 'int8_t {aka signed char}' inside { } [-Wnarrowing] sketch\OpenCat.h:732:1: warning: narrowing conversion of '-9.0e+1' from 'double' to 'int8_t {aka signed char}' inside { } [-Wnarrowing] sketch\OpenCat.h:732:1: warning: narrowing conversion of '-2.25e+1' from 'double' to 'int8_t {aka signed char}' inside { } [-Wnarrowing] C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino: In function 'void setup()': C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino:254:34: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] motion.loadBySkillName("rest"); ^ C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino: In function 'void loop()': C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino:365:29: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] skillByName("rest"); ^ C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino:404:45: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] motion.loadBySkillName("calib"); ^ Sketch uses 25572 bytes (79%) of program storage space. Maximum is 32256 bytes. Global variables use 1364 bytes (66%) of dynamic memory, leaving 684 bytes for local variables. Maximum is 2048 bytes. An error occurred while uploading the sketch This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences. Verbose Output: Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Arduino Uno" C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\Ironbeagle4222\Documents\Arduino\libraries -fqbn=arduino:avr:uno -vid-pid=0000_0000 -ide-version=10813 -build-path C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967 -warnings=none -build-cache C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_cache_396762 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arduinoOTA.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.avrdude.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -verbose C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\arduino-builder -compile -logger=machine -hardware C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\tools-builder -tools C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -built-in-libraries C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\libraries -libraries C:\Users\Ironbeagle4222\Documents\Arduino\libraries -fqbn=arduino:avr:uno -vid-pid=0000_0000 -ide-version=10813 -build-path C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967 -warnings=none -build-cache C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_cache_396762 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arduinoOTA.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.3.0.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.avrdude.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino7.path=C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr -verbose C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino Using board 'uno' from platform in folder: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr Using core 'arduino' from platform in folder: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr Detecting libraries used... "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\variants\\standard" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Alternatives for Wire.h: [Wire@1.0] ResolveLibrary(Wire.h) -> candidates: [Wire@1.0] "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\variants\\standard" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\Wire\\src" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Alternatives for Adafruit_PWMServoDriver.h: [Adafruit_PWM_Servo_Driver_Library@2.4.0] ResolveLibrary(Adafruit_PWMServoDriver.h) -> candidates: [Adafruit_PWM_Servo_Driver_Library@2.4.0] "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\variants\\standard" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\Wire\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\Adafruit_PWM_Servo_Driver_Library" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Alternatives for EEPROM.h: [EEPROM@2.0] ResolveLibrary(EEPROM.h) -> candidates: [EEPROM@2.0] "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\variants\\standard" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\Wire\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\Adafruit_PWM_Servo_Driver_Library" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\EEPROM\\src" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Alternatives for I2Cdev.h: [I2Cdev] ResolveLibrary(I2Cdev.h) -> candidates: [I2Cdev] "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\variants\\standard" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\Wire\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\Adafruit_PWM_Servo_Driver_Library" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\EEPROM\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\I2Cdev" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Alternatives for MPU6050.h: [MPU6050] ResolveLibrary(MPU6050.h) -> candidates: [MPU6050] "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\variants\\standard" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\Wire\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\Adafruit_PWM_Servo_Driver_Library" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\EEPROM\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\I2Cdev" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\MPU6050" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Using cached library dependencies for file: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr\libraries\Wire\src\Wire.cpp Using cached library dependencies for file: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr\libraries\Wire\src\utility\twi.c Using cached library dependencies for file: C:\Users\Ironbeagle4222\Documents\Arduino\libraries\Adafruit_PWM_Servo_Driver_Library\Adafruit_PWMServoDriver.cpp Using cached library dependencies for file: C:\Users\Ironbeagle4222\Documents\Arduino\libraries\I2Cdev\I2Cdev.cpp Using cached library dependencies for file: C:\Users\Ironbeagle4222\Documents\Arduino\libraries\MPU6050\MPU6050.cpp Generating function prototypes... "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\variants\\standard" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\Wire\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\Adafruit_PWM_Servo_Driver_Library" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\EEPROM\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\I2Cdev" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\MPU6050" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp" -o "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\preproc\\ctags_target_for_gcc_minus_e.cpp" Compiling sketch... "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10813 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\cores\\arduino" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\variants\\standard" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\Wire\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\Adafruit_PWM_Servo_Driver_Library" "-IC:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\arduino\\avr\\libraries\\EEPROM\\src" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\I2Cdev" "-IC:\\Users\\Ironbeagle4222\\Documents\\Arduino\\libraries\\MPU6050" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp" -o "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp.o" In file included from C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\sketch\OpenCat.h:85:0, from C:\Users\Ironbeagle4222\Downloads\OpenCat\OpenCat\WriteInstinct\WriteInstinct.ino:31: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr\libraries\Wire\src/Wire.h: In member function 'void Motion::loadDataFromI2cEeprom(unsigned int&)': C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr\libraries\Wire\src/Wire.h:68:13: note: candidate 1: uint8_t TwoWire::requestFrom(int, int) uint8_t requestFrom(int, int); ^~~~~~~~~~~ C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr\libraries\Wire\src/Wire.h:65:13: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t) uint8_t requestFrom(uint8_t, uint8_t); ^~~~~~~~~~~ Compiling libraries... Compiling library "Wire" Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\libraries\Wire\Wire.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\libraries\Wire\utility\twi.c.o Compiling library "Adafruit_PWM_Servo_Driver_Library" Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\libraries\Adafruit_PWM_Servo_Driver_Library\Adafruit_PWMServoDriver.cpp.o Compiling library "EEPROM" Compiling library "I2Cdev" Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\libraries\I2Cdev\I2Cdev.cpp.o Compiling library "MPU6050" Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\libraries\MPU6050\MPU6050.cpp.o Compiling core... Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\wiring_pulse.S.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\hooks.c.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\WInterrupts.c.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\wiring_analog.c.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\wiring.c.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\wiring_shift.c.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\wiring_pulse.c.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\wiring_digital.c.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\Print.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\CDC.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\IPAddress.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\HardwareSerial3.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\USBCore.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\HardwareSerial1.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\HardwareSerial0.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\HardwareSerial.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\PluggableUSB.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\Tone.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\Stream.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\WMath.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\HardwareSerial2.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\WString.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\abi.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\new.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\main.cpp.o Using previously compiled file: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967\core\core.a Archiving built core (caching) in: C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_cache_396762\core\core_arduino_avr_uno_d72cf7820821928d7aba3a85f82dacbf.a Linking everything together... "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-gcc" -w -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega328p -o "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967/WriteInstinct.ino.elf" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\sketch\\WriteInstinct.ino.cpp.o" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\libraries\\Wire\\Wire.cpp.o" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\libraries\\Wire\\utility\\twi.c.o" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\libraries\\Adafruit_PWM_Servo_Driver_Library\\Adafruit_PWMServoDriver.cpp.o" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\libraries\\I2Cdev\\I2Cdev.cpp.o" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967\\libraries\\MPU6050\\MPU6050.cpp.o" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967/core\\core.a" "-LC:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967" -lm "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967/WriteInstinct.ino.elf" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967/WriteInstinct.ino.eep" "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-objcopy" -O ihex -R .eeprom "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967/WriteInstinct.ino.elf" "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967/WriteInstinct.ino.hex" Using library Wire at version 1.0 in folder: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr\libraries\Wire Using library Adafruit_PWM_Servo_Driver_Library at version 2.4.0 in folder: C:\Users\Ironbeagle4222\Documents\Arduino\libraries\Adafruit_PWM_Servo_Driver_Library Using library EEPROM at version 2.0 in folder: C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\arduino\avr\libraries\EEPROM Using library I2Cdev in folder: C:\Users\Ironbeagle4222\Documents\Arduino\libraries\I2Cdev (legacy) Using library MPU6050 in folder: C:\Users\Ironbeagle4222\Documents\Arduino\libraries\MPU6050 (legacy) "C:\\Program Files\\WindowsApps\\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\\hardware\\tools\\avr/bin/avr-size" -A "C:\\Users\\Ironbeagle4222\\AppData\\Local\\Temp\\arduino_build_388967/WriteInstinct.ino.elf" Sketch uses 25572 bytes (79%) of program storage space. Maximum is 32256 bytes. Global variables use 1364 bytes (66%) of dynamic memory, leaving 684 bytes for local variables. Maximum is 2048 bytes. C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avrdude -CC:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf -v -patmega328p -carduino -PCOM3 -b115200 -D -Uflash:w:C:\Users\Ironbeagle4222\AppData\Local\Temp\arduino_build_388967/WriteInstinct.ino.hex:i avrdude: Version 6.3-20190619 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch System wide configuration file is "C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.42.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf" Using Port : COM3 Using Programmer : arduino Overriding Baud Rate : 115200 An error occurred while uploading the sketch

357