petoi-camp-logo.png
Chinese
ZH
Chinese
ZH
English
EN
  • 主页

  • 论坛

  • Shop

  • 简介

  • 图鉴

  • 资源

    • Documentation Center
    • GitHub 源代码
    • 教程视频
    • NyBoard V0_1 手册
    • NyBoard V0_2 手册
    • Smartphone App
    • GitHub/CatMini
  • 社区

    • 成员
  • More

    Use tab to navigate through the menu items.
    Rafael Marín
    2d

    Error moving joints simultaneously in Mobile app

    5
    0
    Tomi Ade
    5d

    Trouble Uploading to Nyboard - stk500_recv(): programmer is not responding

    3
    0
    Phillip Brush
    8月09日

    On Definition Rule Issues

    4
    0
    若要查看作用方式,請前往您的即時網站。
    • 類別
    • 所有文章
    • 我的文章
    Serena Mou
    2021年8月08日

    Cannot flash testBuzzer

    在 Basic Assembly and Setup

    I have followed the instruction and at the stage of flashing testBuzzer, I come across a few errors.

    The serial monitor output looks like this:


    The baud rate is set to 115200 and No line ending is set.

    It compiles okay but I get this error when flashing.


    Arduino: 1.8.13 (Windows 10), Board: "Arduino Uno"


    Sketch uses 5362 bytes (16%) of program storage space. Maximum is 32256 bytes.

    Global variables use 328 bytes (16%) of dynamic memory, leaving 1720 bytes for local variables. Maximum is 2048 bytes.


    avrdude: stk500_paged_load(): (a) protocol error, expect=0x10, resp=0x61

    avrdude: stk500_cmd(): programmer is out of sync

    avr_read(): error reading address 0x0000

    read operation not supported for memory "flash"

    avrdude: failed to read all of flash memory, rc=-2

    avrdude: stk500_disable(): protocol error, expect=0x14, resp=0xeb

    avrdude: stk500_disable(): protocol error, expect=0x14, resp=0xeb




    This report would have more information with

    "Show verbose output during compilation"

    option enabled in File -> Preferences.


    Any help will be much appreciated!

    3 則留言
    0
    3 則留言
    R
    Rongzhong Li
    2021年8月09日

    Ok, it seems that the signal is getting interfered, either due to the chip or the cable. Two solutions:

    1. You could write to support@petoi.com to provide your shipping information, and we will ship another programmer to see if it solves the problem

    2. Buy a "Mini FT232RL FTDI 3.3 5V USB to TTL Serial Converter Adapter Module for Arduino" online and if it solves the problem, we can send you a reimbursement.

    按讚

    S
    Serena Mou
    2021年8月08日

    Thanks for replying.

    The serial port can be found and selected in Tools -> Port. I have tried restarting Arduino IDE and using a different port. I have also tried in Linux Ubuntu with the same error and trouble with the serial monitor.

    按讚

    R
    Rongzhong Li
    2021年8月08日

    There's problem in the communication between the programmer and the NyBoard. Have you installed the driver and selected the serial port in Arduino IDE->Tools->Port?

    The driver of the Uploader:

    Mac: http://www.wch.cn/download/CH341SER_MAC_ZIP.html

    Windows: http://www.wch.cn/download/CH341SER_EXE.html

    按讚
    3 則留言
    相似文章
    • Cannot calibrate
    • testBuzzer error
    • TestBuzzer error

    Pittsburgh, PA, USA | info@petoi.com 

    © 2019 Petoi LLC

    © 2019 Petoi LLC