Is there a way to get a 3d model for the cover or the dimensions of the existing one?
I will use my own bluetooth module for control bittle by joystick, but unfortunately the module (plus some further cables and modules) doesn't fit under the standard cover.
Before i scale the standard cover on my own, maybe someone has already printed a customized cover?
I just want to increase the height a little bit, so my added modules were protected, when bittle is falling or dropping.
At the moment i've created my own neck part and head, which is able to host a ESP32 camera module, which provide a wlan and a webserver for the video transmission.
Hello community, i've created a first draft of a higher cover for 3D printing and it fits. Additionally rescue movement is still working, too.
I will improve some points in future, for example:
- thinner walls, so the assemble/disassemble will working easier (currently you need 'long' fingernails, to deassemble it)
- optimize dimensions, so cover fits nearly perfectly
- close the little gap on front- and backside
But currently it fullfills the requirement of more space and protects the controller, when bittle is falling.
Unfortunately i can't upload the .stl-file.
Does anyone know, how i could upload the .stl-file here?