I just got my Pittle and after installing all the nesesary drives I tried to compile WriteInstinct.ino the IDE gives an error that says "Error compiling for board Arduino Uno."
Something is wrong with the content of MPU6050 library folder (C:\Users\SOL_K\Documents\Arduino\libraries\MPU6050). It should contain those files:
Seems like you have there something else. Can you remove the folder and carefully add it one more time? Here is the steps in 4.2.2: https://bittle.petoi.com/4-configuration
Just to clarify, after completing instruction 4.2.2 you should have MPU6050 folder as above and the \Arduino\libraries\I2Cdev folder like this:
Try this and then we can tackle connectivity issue
@Ben Good news! To check if you have proper drivers for the board please see in Device Manager. See if you get anything like CH340 when you connect USB cable with programmer attached (programmer to Bittle connection not required)
Hi @Ben so let's do it step by step.
Something is wrong with the content of MPU6050 library folder (C:\Users\SOL_K\Documents\Arduino\libraries\MPU6050). It should contain those files:
Seems like you have there something else. Can you remove the folder and carefully add it one more time? Here is the steps in 4.2.2: https://bittle.petoi.com/4-configuration
Just to clarify, after completing instruction 4.2.2 you should have MPU6050 folder as above and the \Arduino\libraries\I2Cdev folder like this:
Try this and then we can tackle connectivity issue